Website disclaimer

The information contained in this website is for general information purposes only. The information is provided by Precision Sealing Technology Limited and while we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this website.

Through this website you are able to link to other websites which are not under the control of Precision Sealing Technology Limited. We have no control over the nature, content and availability of those sites. The inclusion of any links does not necessarily imply a recommendation or endorse the views expressed within them.

Every effort is made to keep the website up and running smoothly. However, Precision Sealing Technology Limited takes no responsibility for, and will not be liable for, the website being temporarily unavailable due to technical issues beyond our control.

This website and its content is copyright of Precision Sealing Technology Limited 2016. All rights reserved.

Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

you may print or download to a local hard disk extracts for your personal and non-commercial use only

you may copy the content to individual third parties for their personal use, but only if you acknowledge the website as the source of the material

You may not, except with our express written permission, distribute or commercially exploit the content. Nor may you transmit it or store it in any other website or other form of electronic retrieval system.

A854 SINGLE ACTING COMBINED PNEUMATIC ROD AND WIPER SEAL

• PROVIDES EXCELLENT SEALING PERFORMANCE
• FUNCTIONS AS ROD SEAL AND WIPER AT THE SAME TIME
• SUITABLE FOR OILED OR OIL-FREE WORKING CONDITIONS
• EASY INSTALLATION TO OPEN HOUSINGS
• VERY SMOOTH WORKING PERFORMANCE DUE TO LIP GEOMETRY
• HIGH WEAR RESISTANCE
• LONG SERVICE LIFE
• VERY ECONOMIC
• WIDE RANGE DIMENSIONS AVAILABLE

• General Properties
• Technical Properties

General Properties

A854

• Group by
  • None
  • ALP NR.
  • DIMENSION
  • Ød
  • ØD
  • B
  • ØD1
  • H
  • R
  • h
  • a

		ALP NR.	DIMENSION	Ød	ØD	B	ØD1	H	R	h	a
Display # 5 10 15 20 25 30 50 100 Page 1 of 2 Start Prev 1 2 Next End
No records
	View	A854-012	12X22X10,4	12	22	7.7	24	13	1.1	10.4	1.5
	View	A854-014	14X24X10,4	14	24	7.7	26	13	1.1	10.4	1.5
	View	A854-016	16X26X10,4	16	26	7.7	28	13	1.1	10.4	1.5
	View	A854-018	18X28X11	18	28	7.7	30	13	1.1	11	1.5
	View	A854-018/1	18X28X10,4	18	28	7.7	30	13	1.1	10.4	1.5
	View	A854-020	20X30X10,4	20	30	7.7	32	13	1.1	10.4	1.5
	View	A854-025	25X35X11	25	35	8	37.5	13	1.4	11	2
	View	A854-030	30X40X11,5	30	40	8	42.5	14	1.4	11.5	2
	View	A854-032	32X42X11	32	42	8	44.5	13	1.4	11	2
	View	A854-035	35X45X11,5	35	45	8	47.5	13	1.4	11.5	2

Technical Properties

A854 SINGLE ACTING HEAVY DUTY PNEUMATIC ROD AND WIPER SEAL ALP A854 two pieces pneumatic combined rod and wiper seal is designed to be used especially for heavy duty pneumatic cylinders for rod applications and performs sealing and wiping functions whilst working in the cylinder. A854 single acting pneumatic heavy duty rod and wiper seal is manufactured with high specification special 92 shore ALP PU compound and TPE compound for heavy duty applications or 90 shore ALP NBR compound and TPE compound for medium duty applications as standard. Please contact our sales team for pricing and lead time, This email address is being protected from spambots. You need JavaScript enabled to view it.. Wide range of sizes available on Exstock. ALP A854 pneumatic rod seal functions both as a sealing element and wiper simultaneously and provides excellent sealing performance. It offers protection against dirt particles on the front face of the cylinder, high wear resistance, long service life, easy installation, very low dynamic and static friction and smooth running due to lip geometry and is suitable for oiled or oil-free working conditions (the seal should be lubricated on assembly) A854 single acting combined pneumatic rod and wiper seal is to be used safely for heavy duty and medium duty pneumatic cylinders depending on the compound.

TECHNICAL DATA Standard Materials NBR+TPE PU+TPE Working Pressure 16 Bar 16 Bar Working Temperature -30 +105 -30 +80 Sliding Speed 1 m/sn 1 m/sn Material 80 NBR+TPE 92 PU+TPE Media Dried compressed air Dried,oiled compressed air   Surface Roughness   Rmax Dynamic Surface ≤4 μm Groove Base ≤10 μm Groove Flanks ≤15 μm

 

A808 DOUBLE ACTING PNEUMATIC PISTON SEAL

• PROVIDES EXCELLENT SEALING PERFORMANCE
• SUITABLE FOR OILED OR OIL-FREE WORKING CONDITIONS
• SUITABLE FOR LOW HEIGHT HOUSINGS
• EASY INSTALLATION
• SUITABLE TO USE IN VALVES
• VERY ECONOMIC
• WIDE RANGE DIMENSIONS AVAILABLE

• General Properties
• Technical Properties

General Properties

A808

• Group by
  • None
  • ALP NR.
  • DIMENSION
  • Ød
  • ØD
  • B
  • Ød1

		ALP NR.	DIMENSION	Ød	ØD	B	Ød1
Display # 5 10 15 20 25 30 50 100
No records
	View	A808-032	32X24X3,2	24	32	3.2	31.5
	View	A808-040	40X32X3,2	32	40	3.2	39.5
	View	A808-050	50X40X4	40	50	4	49.5
	View	A808-063	63X53X4	53	63	4	62.4
	View	A808-080	80X65X6	65	80	6	79.4
	View	A808-100	100X85X6	85	100	6	99.4

Technical Properties

A808 DOUBLE ACTING PNEUMATIC PISTON SEAL ALP A808 pneumatic piston seal is designed to be used especially for short stroke pneumatic cylinders for piston applications and in valves A808 double acting pneumatic piston seal is manufactured with high specification special 70 shore ALP NBR compound as standard and could be manufactured with ALP FKM compound for extreme working conditions on your demand. Please contact our sales team for pricing and lead time. This email address is being protected from spambots. You need JavaScript enabled to view it. Wide range of sizes available on Exstock. ALP A808 double acting pneumatic piston seal offers, excellent sealing performance even very small assembly conditions, long service life, easy installation, very low dynamic and static friction and suitable for oiled or oil-free working conditions (the seal should be lubricated on assembly). A808 double acting pneumatic piston seal is to be used safely for short stroke pneumatic cylinders and valves.

TECHNICAL DATA Standard Materials NBR Working Pressure 12 Bar Working Pressure 1 m/sn Working Temperature -30 +105 Material 70 NBR Media Dried,oiled compressed air   Surface Roughness   Rmax Working Surface ≤4 μm Groove Base ≤10 μm Groove Flanks ≤15 μm

 

A807 SINGLE ACTING PNEUMATIC PISTON SEAL

• PROVIDES EXCELLENT SEALING PERFORMANCE
• SUITABLE FOR OILED OR OIL-FREE WORKING CONDITIONS
• EASY INSTALLATION
• SUITABLE TO USE IN VALVES
• VERY SMOOTH WORKING PERFORMANCE DUE TO LIP GEOMETRY
• HIGH WEAR RESISTANCE
• LONG SERVICE LIFE
• VERY ECONOMIC
• WIDE RANGE DIMENSIONS AVAILABLE

• General Properties
• Technical Properties

General Properties

A807

• Group by
  • None
  • ALP NR.
  • DIMENSION
  • Ød
  • ØD
  • b
  • B
  • PU
  • NBR
  • Ød1

		ALP NR.	DIMENSION	Ød	ØD	b	B	PU	NBR	Ød1
Display # 5 10 15 20 25 30 50 100 Page 1 of 2 Start Prev 1 2 Next End
No records
	View	A807-008	8X4,80X2,30	4.8	8	2.3	2.7	7.6	PU	NBR
	View	A807-010	10X6X2,55	6	10	2.55	3	9.6	PU	NBR
	View	A807-012	12X7X2,55	7	12	2.55	3	11.6	PU	NBR
	View	A807-016	16X10X2,55	10	16	2.55	3	15.6	PU	NBR
	View	A807-020	20X14X2,55	14	20	2.55	3	19.6	PU	NBR
	View	A807-025	25X19X3,25	19	25	3.25	3.5	24.4	PU	NBR
	View	A807-032	32X24X3,25	24	32	3.25	3.5	31.4	PU	NBR
	View	A807-040	40X32X3,25	32	40	3.25	3.5	39.4	PU	NBR
	View	A807-050	50X42X3,25	42	50	3.25	3.5	49.4	PU	NBR
	View	A807-063	63X53X4,25	53	63	4.25	4.5	62.4	PU	NBR

Technical Properties

A807 SINGLE ACTING PNEUMATIC PISTON SEAL ALP A807 pneumatic lip seal is designed especially to be used for short stroke pneumatic cylinders for piston applications and in valves. A807 single acting pneumatic piston seal is manufactured with high specification special 80 shore ALP NBR compound and 80 shore ALP PU compound as standard and could be manufactured with ALP FKM compound for extreme working conditions on your demand. Please contact our sales team for pricing and lead time, This email address is being protected from spambots. You need JavaScript enabled to view it.. Wide range of sizes available on Exstock. ALP A807 pneumatic piston seal offers, excellent sealing performance even in very small assembly conditions, very good wear resistance, long service life, easy installation, very low dynamic and static friction and smooth running due to lip geometry and is suitable for oiled or oil-free working conditions (note that the seal should be lubricated on assembly). A807 single acting pneumatic piston seal is to be used safely for short stroke pneumatic cylinders and valves.

TECHNICAL DATA Standard Materials PU NBR Working Pressure 16 Bar 12 Bar Working Temperature -30 +80 -30 +105 Sliding Speed 1 m/sn 1 m/sn Material 80 PU 80 NBR Media Dried compressed air Dried,oiled compressed air   Surface Roughness   Rmax Dynamic Surface ≤4 μm Groove Base ≤10 μm Groove Flanks ≤15 μm

 

Precision Sealing technology (PST) LTD is engaged in the sales and distribution of hydraulic and pneumatic seals and hydraulic pneumatic related products.

Our products are used in a large number of diverse industries from agricultural equipment to pharmaceuticals. Our responsibility is to provide every customer with the highest quality products which measure up to our stringent standards; including  reliability, long running time and less break down for any hydraulic pneumatic related applications.

Our company policy stipulates that the products and services provided should be competitive and meet the customer’s requirements and satisfaction.

Our aim is to provide high quality reliable products and technical solutions by understanding customer expectations for any hydraulic pneumatic related applications and build up trust in the market.

We believe our team should be involved in every stage of the sales process; from factory to our customers, and it is essential to train our team to meet the demands of the market and keep up with the ever changing technological innovations.

The management at Precison Sealing Technology (PST) Ltd are dedicated to;

• Providing the customers with high quality products, technical solutions and good customer services and therefore consistently achieving the highest level of satisfaction.
• Ensuring that the customers have the possible shortest lead times therefore preventing undue disruption in the running of machinery.
• Encouraging both individual and team commitment throughout the company and the adherence to the statutory and regulatory requirements.
• Regular staff training programmes to keep them abreast of the latest innovations.
• Regularly liaising with our production over changing market trends.
• Improving our services at every level.

 Levent Demiralp

Director

We aim to provide the customer with;

• Tried and tested sealing components produced from high performance materials in order to extend seal integrity and durability.

• Advanced design sealing elements which will maximise equipment performance and reduce maintenance and downtime; therefore improving cost effectiveness.

• Excellent technical support and customer service both before and after sales.